Confidential & Proprietary 7/35
-‐ A readyily accessible disconnect device shall be incorporated external to the equipment.
-‐ This power of this system shall be supplied through wiring installed in a normal building.
If powered directly from the mains distribution system, it shall be used additional protection, such as
overvoltage protection device
-‐ Only 50 ohm rated antennas, cables and passive equipment shall be used with this remote. Any
equipment attached to this device not meeting this standard may cause degradation and unwanted
signals in the bi-‐directional system. All components connected to this device must operate in the
frequency range of this device.
-‐
Only 50 ohm rated antennas, cables and passive components operating from 150 -‐ 3 GHz shall be
used with this device.
-‐
The Manufacturer's rated output power of this equipment is for single carrier operations. F
or situations when multiple carrier signals are present, the rating would have to be reduce
d by 3.5 dB, especially where the output signal is re-‐radiated and can cause interference to
adjacent band users. This power reduction is to be by means of input power or gain redu
ction and not by an attenuator at the output of the device.
-‐ Signal booster warning label message should include
-‐
