6
Stereo Outputs - Direct Channel Outs (CH OP), Post Fader
Each X-Panda Stereo channel features a dedicated Channel Output (
CH OP
). This
provides a direct Stereo Output.
Normally this is sourced Pre Fader but by engaging the “
POST”
switch that source
becomes Post Fader. The Channel Direct Outputs (
CH OP
) are primarily used to feed
the inputs of your chosen recorder or DAW. On the rear panel connection panel of X-
Panda they are labelled “
CHAN OUT ST 1-4
”.
(
Note that there is no “
ALT
” option on the X-Panda Stereo Channels
)
Stereo Cue Send
Provides a Stereo Send primarily for Cue purposes. By default the signal is sourced
pre fader but additionally it can be sourced after the Channel Fader by selecting
“
POST
”. It may be worth bearing in mind that if you are using X-Panda in
conjunction with an X-Desk and on the X-Desk are using the “
Cue to MIX
” function
you may wish to turn this
CUE ST
send off on the X-Panda Stereo channels.
FX Sends 1&2
There are two FX sends on the Stereo channels and they take a summed Mono signal
of your Stereo Input source. By default the signal is sourced post Fader.