Solid State Logic AWS 900+, Owner'S Manual

Page: 101 / 146

SEL menu
The SEL menu is the main file menu for the Total Recall system. The main window shows a list of stored
setups. The setup which is being displayed has the word ‘selected’ next to it.
Storing setups
Setups can be stored at any time using the STORE soft key. This saves the current desk setup to local memory.
If the desk is turned off these settings will be lost. TR setups must be saved to a sequencer or DAW
MIDI track for permanent storage.
New setups are numbered starting at ‘1’. If a setup is deleted (see below) then its number will not be re-used.
The only exception to this is if all setups are deleted. The numbering will then restart from ‘1’.
Changing the selected setup
The left hand rotary control can be used to scroll through the list of TR setups. A yellow cursor indicates which
setup is currently chosen to be modified. Either the
SELECT soft key or the rotary encoder’s push-push switch
can be used to select the highlighted setup for display. The ‘ selected’ message will appear next to the setup to
indicate that it is being displayed.
Deleting Setups
Setups can be deleted from memory by highlighting the setup up you wish to delete, holding down the DELETE
soft key and pressing the CONFIRM soft key.
Total Recall
6 - 2
AWS 900+ Owner’s Manual
Total Recall
TR
Misc
Sel
TR
Chan CmFb DynB StRt Copy Save
SSL
Load
SELECT STORE DELETE CONFIRM
TR 1 selected
TR 2
TR 3
TR 4
TR 5
Left hand rotary control
scrolls through the list
of setups
selected shows which setup
is currently being displayed
Yellow cursor indicates
the chosen setup
Shows function of the
top four soft keys
Shows function of the
lower sixteen soft keys
Press the SELECT key
or the rotary control
push-push switch to
chose which Setup is
displayed
Press STORE
key to store a
new Setup
Hold down DELETE then
press CONFIRM to delete
the highlighted setup
SAVE and
LOAD keys
permanently
store or load
setups to PC
COPY key
selects Channel
Copy mode
Display Select
keys