PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V
Toll Free. 866-592-3873
www.SolidApollo.com
page 7
Glass
Touch In-wall RGB
™
Advanced Functionality
Power Button and Sound Control:
Your controller’s main button which turns your 12V-24V DC RGB LED lights on and off as well as enabling and
disabling the sound indications for your controller. To turn on and off your lights, simply tap the power button. This will toggle all of your RGB LED
lights On and Off.
To disable sound (your controller has sound response as default “out of the box”) you can simply hold the power button for five seconds. You will hear
an indication beep, and can now use your lights without hearing the sound. To turn the sound indications back on, hold down the power button again
for five seconds. You will hear an indication beep, confirming the change.
Color Wheel:
Your Glass Touch In-Wall RGB Controller has a color wheel for easy and immediate color section. Simply press down on the wheel at
any point with your finger to select a color, or swirl your finger around the wheel to slowly shift between colors. Color selection and brightness will
be recalled when the power is turned off, then back on.
Quick Static Color Selection:
This button allows you to quickly cycle through 20 preset colors (described in detail on the next page) for easy color
selection. This allows you to easily select an exact tone (such as Cyan, White, or Yellow) without finding its exact position on the color wheel. Simple
tap to cycle through the 20 pre-loaded colors.
Quick Program Selection:
This button allows you to toggle through the 19 pre-installed programs. You can tap the “Quick Program Selection”
Button to cycle through all 19 programs, one after the other. A full list of programs is available on the next page. Program Speed (covered in the
following section) and Specific Program are saved when powering off, meaning you can turn off your lights, and then back on to exactly what they
had been displaying.
