background image

PRODUCT MANUAL 

RGB NeonMini 24V 60W

Toll Free. 425-582-7533
www.SolidApollo.com

 

[email protected]

 

page 1

Product Description

Product Features

RGB NeonMini 24V 60W

Thank you for purchasing Solid Apollo’s RGB NeonMini 24V 60W!

Solid Apollo’s RGB NeonMini is a state of the art Neon LED light 
simulating the effect and look of neon in a continuous well-balanced 
light. This next generation bendable RGB NeonMini projects a brutally 
bright light offering optimum performance, energy efficiency, and 
effortless maintenance over traditional glass neon.

This user guide is intended to instruct and guide any user on how to 
properly cut the RGB NeonMini to length, re-power with a new power 
cable, and completely waterproof the connection.

•  20ft Spool
•  Flexible & Cuttable
•  Side Bending
•  Cut Points Every 2in
•  Fully Dimmable
•  Features a 6.6ft Waterproof Cable w/ Female Barrel Connector
•  Low Voltage Product at 24V - 60W Per Spool
•  Fully Waterproof, Rated at IP67
•  Indoor / Outdoor Application
•  Product Comes Ready to Plug & Play
•  Perfect for Accent Lighting, Linear Lighting and In-Wall Lighting

•  Proper Cutting and Installation
•  Waterproofing and 

Configuration Process

•  Technical Information
•  Do’s and Don’ts

Manual Will Review

Summary of Contents for RGB NeonMini






Reviews: