SOLID AIR FDC25, Manual

Page: 5 / 58

SOLID AIR ® CLIMATE SOLUTIONS • T +31 598 36 12 21 • www.solid-air.com • mail@solid-air.com
5 - 58
>> Product overview
>> Technical data
>> Models
>> Ordering key
>> Dimensions
>> Installations
>> Actuators
>> Accessories
>> Replacements
>> Maintenance and operation
TESTS AND CERTIFICATES
All our dampers are submitted to a number of tests by official test institutes. Reports of
these tests form the basis for the approvals of our dampers. Klimaoprema fire dampers
are also suitable for installation in buildings with high hygienic demands such as
hospitals, clinics and pharmaceutical areas. To confirm this, out products are tested by
an independent Institute of Hygiene, based in Gelsenkirchen, Ruhr, and comply with
directives and guidelines in VDI 6022.
FIRE RESISTANCE CLASSIFICATION
FDC fire resistance is tested according to EN 1366-2 “Fire resistance tests for service
installations- Part 2: Fire dampers”. Classification of the fire dampers is defined
according to EN 13501-3 Fire classification of construction products and building
elements.
Installation in both, vertical and horizontal axis of rotation of the dampers blade is
acceptable (with the axis angle 0 - 360°). Fire resistance of fire damper depends on
classification of walls or ceilings. It is allowed to install products to walls or ceilings only
according to products Declaration of Performance. Walls or ceilings with greater fire
resistance can also be used. Fire damper should be installed according to the installation
manual which can be found within this document.
Please consult latest Declaration of Performance: solid-air.nl/downloads (DoP FDC25/40)
For more information about certificates, visit our website: solid-air.nl/brandwerend
E - Integrity
I - Insulation
120/90/60 - Classification time in minutes
S -
Smoke leakage
ve - Damper installed in vertical compartment
ho - Damper installed in horizontal compartment
i↔o - Fire performance criteria are met on both sides
PRODUCT OVERVIEW
> >