background image

 

 

Clean or Replace Filter 

-

 If the air filter is blocked with a dust, the airflow volume may reduce. It is      

recommended to clean the filter once every two weeks or as needed.

 

1)

 

Remove the filter from the filter compartment on the back of the unit.

 

2)

 

Wash the air filter by immersing it gently into warm water with a neutral detergent. Rinse the 

filter and dry it thoroughly out of sunlight.

 

3)

 

Slide the filter back into the filter compartment after it is thoroughly dried.

 

4)

 

If the filter is torn or unusable, order a new filter by calling the customer service number on the 

warranty page of this manual.

 

 
 
 
 
 
 
 
 
 
 
 
 
 

Clean the Unit Housing

 

1)   Keep the unit from being exposed directly to the sun to prevent color fading.

 

2)   Clean the surface with a damp cloth and dry it with a soft towel.

 

Storing the Unit for an Extended Period of Time or Transporting the Unit

 

1)

 

Empty excess water by unplugging the drain plug in the back of the unit (located at the bottom).

 

2)   Unplug the unit.

 

3)

   The unit should be stored in a cool dry place.

 

 

DISCLAIMER

 

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE 

THE PRESENTATION OF THE MANUFACTURER.  JHS INC. HAS NOT CONDUCTED AN INDEPENDENT TEST 

TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

 

NOTE: 

Make sure power is off and the power cord is not plugged into an electrical outlet prior to 

performing any maintenance on the unit.

 

MAINTENANCE

 

PSH

-

08

-

01

 

PSH

-

09

-

01

 

Summary of Contents for PSH-08-01




















Reviews: