1)
Power On and Off
-
When the unit is plugged in, press the
POWER
button to turn on the unit.
Press the
POWER
button once more to turn the unit off. When in Air Conditioner mode, Auto mode,
and Sleep mode, the selected temperature will appear on the remote control LCD display. When the
unit is in Fan mode or Dehumidifier mode, room temperature will be displayed. Temperature selection
is not available when the unit is in Fan mode and Dehumidifier mode.
2)
Mode Selection
-
Press the
MODE
button repeatedly to cycle between the different modes: Auto, Air
Conditioner, Dehumidifier, and Fan
-
Only mode. The mode icon on LCD display will light up showing
which mode is selected.
3)
Mirage Display
-
Press the
MIRAGE
button to activate the Mirage Display on the front of the unit. The
Mirage Display conveniently shows the ambient temperature from across the room or the temperature
setting on the control panel.
4)
Fan Speed
-
Press the
FAN SPEED
button to choose desired fan speed. When the unit is in Dehu-
midifier mode, the fan speed cannot be changed. When Turbo Cool is activated, fan speed is automat-
ically set on high and is not adjustable in this mode.
5)
Temperature Setting
-
When the unit is in Air Conditioner mode, you can select your desired temper-
ature. Press the
+
or
-
to select your desired temperature setting. The temperature on the LCD display
on the remote control will increase or decrease accordingly. Pressing the
°C
/
°F
button will switch
the temperature select between °C and °F.
6)
SLEEP MODE
-
When in air conditioning mode, press the
SLEEP
button on the remote control, Sleep
mode icon will show on the remote control LCD display. When in
SLEEP
mode, the fan will run on low
to keep fan noise at a minimum. The temperature setting will gradually increase to 2°F above the origi-
nal set temperature each of first 2 hours. The unit will keep operating the same temperature until the
sleep mode is turned off.
7)
TIMER
-
Auto
-
On:
Press the
TIMER
button when the unit is off to set up the Auto
-
on timer. The hour indi-
cator on the LCD display will turn on. Press the
+
or
-
buttons to set timer within 1
-
24 hours.
Auto
-
Off:
Press the
TIMER
button when the unit is On to set up the Auto
-
off timer. The hour indi-
cator on the LCD display will turn on, Press the
+
or
-
buttons to set timer within 1
-
24 hours. To cancel
the timer, press
TIMER
button until the timer mode is turned off.
8)
TURBO COOL
-
Press the
Turbo
button
to activate Turbo Cool mode. The unit will cool at 61°F on fan
high for 10 minutes and then return to the original settings. Fan speed is not adjustable in this mode.
NOTE:
If Fan mode activates less than 3 minutes and switches to Turbo Cool, it will be a compres-
sor protection shut down, compressor will turn on again until the 3 minutes is topped off.
9)
MYTEMP MODE
-
Press the
MYTEMP
button to change the thermostat sensor from the air conditioner
to the remote control location. The air conditioner will cool the area at the location and set temperature
of the remote control.
10)
CHILD LOCK
– Press this button to lock/unlock the remote control buttons.
REMOTE CONTROL
