Auto Mode
1)
Install the exhaust hose and window kit properly (see pages 8&9).
2)
Plug the Power Cord into an electrical outlet.
3)
Turn on the unit by pressing the
POWER
button.
4)
Press the
MODE
button until the Auto mode indicator
lights up on the control panel display.
Auto Mode will operate the unit in air conditioning mode when the temperature is above 72 degrees, Fan
mode when the temperature is below 72 degrees, and heating mode when the temperature is below 68 de-
grees.
Fan Mode
1)
Plug the Power Cord into an electrical outlet.
2)
Turn on the unit by pressing the
POWER
button on the control panel.
3)
Press the
MODE
button until the fan mode indicator lights up on the control panel display.
4)
Select the fan speed by pressing the
FAN SPEED
button.
NOTE:
It is not necessary for the exhaust hose and window kit to be installed to operate the unit in
fan mode.
Sleep Mode
1)
Install the exhaust hose and window kit properly (see pages 8&9).
2)
Plug the Power Cord into an electrical outlet.
3)
Turn on the unit by pressing the
POWER
button on the control panel.
4)
Press the
MODE
button until the sleep mode indicator lights up on the control panel display.
NOTE:
When in
SLEEP
mode, the fan will run on low to keep fan noise at a minimum. The temper-
ature setting will gradually increase to 2°F above the original set temperature each of first 2 hours. The unit
will keep operating the same temperature until the sleep mode is turned off.
UNIT OPERATION
NOTE
:
Switching from Auto mode to Turbo cool is not allowed due to the protection of compressor.
Summary of Contents for PMC-12HP-201
Page 7: ... WINDOW KIT ASSEMBLY ...
