1)
Power On and Off
-
When the unit is plugged in, press the
POWER
button to turn on the unit.
Press the
POWER
button once more to turn the unit off. When in Air Conditioner mode, Heat mode,
Auto mode, and Sleep mode, the selected temperature will appear on the remote control LCD display.
When the unit is in Fan mode or Dehumidifier mode, no temperature will be displayed. This shows that
temperature selection is not available when the unit is in Fan mode and Dehumidifier mode.
2)
Mode Selection
-
Press the
MODE
Button repeatedly to cycle between the different modes: Auto,
Sleep, Air Conditioner, Dehumidifier, Heat, and Fan
-
Only mode. The mode icon on LCD display will
light up showing which mode is selected.
3)
Fan Speed
-
Press the
FAN HIGH, FAN MED, or FAN LOW
button to choose desired fan speed.
When the unit is in Dehumidifier mode, the fan speed cannot be changed. When Turbo Cool is activat-
ed, fan speed is automatically set on high and is not adjustable in this mode.
4)
Temperature Setting
-
When the unit is in Air Conditioner mode or Heat mode, you can select your
desired temperature. Press the ▲ or ▼ to select your desired temperature setting. The temperature
on the LCD display on the remote control will increase or decrease accordingly. Pressing the
°C
/
°F
button will switch the temperature select between °C and °F.
5)
SLEEP MODE
-
When in air conditioning mode, press the
SLEEP
Button on the remote control, Sleep
mode icon will show on the remote control LCD display. When in
SLEEP
mode, the fan will run on low
to keep fan noise at a minimum. The temperature setting will gradually increase to 2°F above the origi-
nal set temperature each of first 2 hours. The unit will keep operating the same temperature until the
sleep mode is turned off.
6)
TIMER
-
Auto
-
On:
Press the
TIMER
button when the unit is off to set up the Auto
-
on timer. The hour indi-
cator on the LCD display will turn on. Press the
TIMER
button repeatedly to set timer within 1
-
24
hours.
Auto
-
Off:
Press the
TIMER
button when the unit is On to set up the Auto
-
off timer. The hour indi-
cator on the LCD display will turn on, Press the ▲ or ▼ buttons to set timer within 1
-
24 hours. To can-
cel the timer, press the TIMER button until the timer mode is turned off.
7)
TURBO COOL
-
Press the
Turbo Cool
button
to activate Turbo Cool mode. The unit will cool at 61° F
on fan high for 10 minutes and then return to the original settings. Fan speed is not adjustable in this
mode.
NOTE:
If Fan mode activates less than 3 minutes and switches to Turbo Cool, it will be a compres-
sor protection shut down, compressor will turn on again until the 3 minutes is topped off. Switching from
Heat or Auto mode to turbo cool is
not allowed
due to the protection of compressor.
8)
MY TEMP MODE
-
Press this button to change the thermostat sensor from the air conditioner to the
remote control location. The air conditioner will cool the area at the location and set temperature of the
remote control.
9)
CHILD LOCK
– Press this button to lock/unlock the remote control buttons.
REMOTE CONTROL
Summary of Contents for PMC-12HP-201
Page 7: ... WINDOW KIT ASSEMBLY ...
