5
Power Selector
Oscillation
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet,
a red power indication light will light up indicating there is power to the unit.
Only operate the heater when it is in the upright position.
Use the instructions below to operate the heater using the control panel.
1. Turn the
POWER SELECTOR
to the desired power setting (High/Low/Fan).
2. This heater can run in LOW, HIGH, and Fan only mode. Choose the desired mode based
on your comfort level.
3. To activate oscillation, turn the
OSCILLATION
dial to the on position. Once it is located,
the heater will oscillate spreading warm air throughout the room.
O
1
2
Off
Fan
Low heat mode
High heat mode
OFF
ON
Polarized Plug
Warning: This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG.