4
BASE ASSEMBLING
1. Guide the power cord through the center of the front base (A) and connect the front base to the main
unit.
2. Fit the rear base (B) onto the front base (A) and the main unit.
3. Secure the base to the main unit using the provided screws (C).
4. Remove the power cord guard (D) and line up the power cord, attach the power core guard (D) over
the power core to the rear base (B).
NOTE
: Do not use your heater if it has not been fully assembled. Make sure that the screws that hold
the base parts and the main unit together are tightened securely.
B
A
C
D
Power indication light
Main Unit
