Soleus GPS Pulse – User Manual
How to set the VIEW
•
Press S5 while VIEW is flashing. CHRONO will start to flash.
•
While “CHRONO” is flashing, press S1/S11 to scroll the various parameters to set. The
parameters are CHRONO, DISTANCE, PACE, SPEED, HRM, CALORIE and CLOCK.
You can select what information to display in Line 1 & Line 3 for
RUN
mode
3.2) TIME, NIGHT, CONTRAST and ALERT,
can also be set in
TIME quick SET
mode.
•
Press and hold S11 while in Time mode. TIME will start to blink.
•
Press S1/S11 to toggle through TIME, NIGHT, CONTRAST and ALERT.
3.3) AUTO LAP, UNITS, USER, and VIEW
can also be set in
RUN quick SET
mode.
•
Press and hold S11 until AUTO LAP blinks.
•
Press S1/S11 to toggle through between AUTO LAP, UNIT, USER and VIEW.
3.4) TIMER
can also be set in
TIMER SET mode
•
Press and hold S11 until SG
1
(segment 1) blinks.
•
Press S5 to set the hour, minute and second.
•
Press S7 to set the Timer alert then press S1/S11 to turn ON or OFF.
3.5) ALARM
can also be set in
ALARM quick SET
mode
.
•
Press and hold S11 until alarm digit “
1
” blinks.
