Soleus GPS Pulse – User Manual
•
Press S5 to confirm and set the HEIGHT. Height digits will start to blink.
•
Press S1/S11 to change the height digits.
•
Press S5 to confirm and go back to USER setting screen.
•
Press S7 to exit
How to set the HRM:
•
Press S5 while HRM is blinking. ZONE 1 will start to blink.
•
Press S1/S11 to change the zone. There are 3 preset zones
•
Press S5 and the watch will display the LOWER limits of the selected zone. LOW limit
digit will start to blink.
•
Press S1/S11 to change the low limit value.
•
Press S5 to confirm. High limit digit will start to blink.
•
Press S1/S11 to change the high limit value.
•
Press S5 to confirm. The watch will display ZONE ALERT ON or OFF.
•
Press S1/S11 to change ON to OFF or vice versa
•
Press S5 to confirm and the watch will go back to HRM setting screen.
How to set the NIGHT mode function:
•
Press S5 while NIGHT is blinking. The watch will display
10
seconds blinking.
•
Press S1/S5 to change to
20
sec or
NIGHT ON
.
•
While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to
NIGHT setting screen.
•
While on NIGHT ON setting screen Press S5 to accept the ON setting. The watch will
display the START TIME.
•
Press S1/S11 to toggle between
START TIME
and
END TIME
.
•
Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
•
Press S1/S11 to change the hour setting.
•
Press S5 to change the MINUTE. Minute digits will start to blink.
•
Press S1/S11 to change the minute setting.
•
Press S5 to go back to START TIME setting screen.
•
Press S1/S11 to set the END TIME. Hour digit will start to blink.
Note: Follow the procedure in setting the START TIME.
•
Press S7 to exit to NIGHT ON setting screen.
Night mode settings:
•
10 SECONDS
– Press S11 will turn ON the Light for 10 seconds.
•
20 SECONDS
– Press S11 will turn ON the Light for 20 seconds.
•
NIGHT ON
– Default Start Time / END Time for NIGHT ON setting is 5 PM to 7 AM.
Following are the characteristics of
NIGHT ON
setting:
o
Start Time and END TIME for NIGHT ON setting can be changed in SET
mode/ NIGHT.
o
When the Night setting is ON, pressing any button within the Start Time / End
Time will turn ON the EL for 10 seconds.
o
Outside the Start time / End Time, only press S11 will turn ON the EL for 10
seconds.
