Step 3) Acquire Satellite signals:
To get the correct time of day and begin using your GPS watch, you have to acquire
GPS signals. It may take few minutes to acquire the satellite signals.
3.1) Go outside to an open area away from tall buildings and trees. Orient the GPS
antenna towards the sky for best reception. The antenna is located at the 6 o’clock
position of the watch.
Note: In order to accurately navigate the GPS, you need to have a good line of
sight to the satellites.
3.2) Stand still and do not begin moving while performing the following steps until the
GPS signals are already received.
3.3) How to Turn-ON the GPS: Press S9 to turn ON the GPS. The watch will start
locating the satellites. After receiving the satellite signals, it will automatically go to
RUN mode and the watch will display “GPS GO” while the “CHRONO
3.4) How to turn OFF the GPS: If you wish to turn OFF the GPS,
about 3 seconds and the watch will momentarily display GPS OFF
to Time view.
Note: When GPS is ON and CHRONO is running or stop, User cannot turn OFF
GPS.
GPS signals and its meaning:
o get the correct time of day and begin using your GPS watch, you have to acquire
signals.
and trees. Orient the GPS
antenna towards the sky for best reception. The antenna is located at the 6 o’clock
In order to accurately navigate the GPS, you need to have a good line of
Stand still and do not begin moving while performing the following steps until the
Press S9 to turn ON the GPS. The watch will start
signals, it will automatically go to
CHRONO” blinks.
If you wish to turn OFF the GPS, press and hold S9 for
about 3 seconds and the watch will momentarily display GPS OFF and then return
When GPS is ON and CHRONO is running or stop, User cannot turn OFF
You will hear a beep sound when the watch has received a GPS signal or when the
GPS signal has been lost. LOST GPS signal will also be displayed in the screen.
If no Satellite signal is received within 15 minutes, the watch will auto return to Time
mode.
Step 4) Go for a Run:
4.1) Using Run mode:
4.4.1) Press S1 or S7 from Time mode to go to RUN mode.
4.4.2) The watch will automatically search for GPS signal. Once the signal is
received, the watch will prompt “GPS GO, PACE and the CHRONO time
blinks.
4.4.3) Press S1 to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
sound during taking of auto lap.
4.4.4) Press S5 to stop after completing your run.
4.4.5) Press & hold S5 again to save your run data.
Note: When the chronograph is stopped or reset, the GPS will automatically turn
OFF after 15 minutes and return to Time mode.
4.2) Using Chronograph mode:
RUN mode and CHRONOGRAPH mode has the same timer counter. When the
chronograph is started or stopped in RUN mode, the same thing happens in
Chronograph mode. They just differ in the views
chronograph, lap time, exercise time, and distance travelled.
4.2.1) Press S1 to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
sound during taking auto lap.
4.2.2) Press S5 to stop after completing your run.
4.2.3) Press & hold S5 again to save your run data.
Step 5) Download your data to PC
The watch comes with PC software to make communication between your watch and
PC easy and enjoyable. Please install the PC software to your PC using the installer
provided. The watch is using a USB PC link cable to connect the watch to PC.
a beep sound when the watch has received a GPS signal or when the
will also be displayed in the screen.
If no Satellite signal is received within 15 minutes, the watch will auto return to Time
Press S1 or S7 from Time mode to go to RUN mode.
automatically search for GPS signal. Once the signal is
GPS GO, PACE and the CHRONO time
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting. And there is a beep
to stop after completing your run.
to save your run data.
When the chronograph is stopped or reset, the GPS will automatically turn
Time mode.
mode has the same timer counter. When the
chronograph is started or stopped in RUN mode, the same thing happens in
er in the views. This mode is dedicated to
lap time, exercise time, and distance travelled.
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting. There is also a beep
to stop after completing your run.
again to save your run data.
Download your data to PC:
The watch comes with PC software to make communication between your watch and
PC easy and enjoyable. Please install the PC software to your PC using the installer
provided. The watch is using a USB PC link cable to connect the watch to PC.
Summary of Contents for GPS 2.0 Watch
Page 9: ......
