9)
Bucket Full
-
When the water bucket completely fills with water, the unit will automatically shut off, make
an audible beep, and the Bucket Full Indicator will light up. The dehumidifier will not function until the wa-
ter bucket is emptied and placed back inside the unit. The bucket should be cleaned every few weeks to pre-
vent the growth of mold, mildew and bacteria. Use a mild detergent to clean the bucket. Once clean, com-
pletely dry the bucket and place it back inside the dehumidifier.
NOTES:
When the bucket is full or removed from the dehumidifier, the compressor will turn off, but the fan
may continue to run for a few minutes. This is completely normal. The dehumidifier will not be removing mois-
ture from the air at this time.
When removing moisture from the air, the dehumidifier will exhaust warm air
from the side exhaust vent. Do not place a full bucket on the floor, because the bottom is uneven.
10)
Clean Filter
-
The Clean Filter indicator will illuminate every 250 hours of operation as a reminder to
clean the filter. (A clean filter will keep the unit operating at optimum performance.) Remove the filter from
the back of the unit by using your thumbs to press down on the filter tabs directly above the filter. Clean the
filter with warm, soapy water. Dry thoroughly before replacing the filter. Once the filter is completely dry,
place the filter back in the unit and press the FILTER button to reset the filter indicator.
CAUTION: DO NOT OPERATE THE DEHUMIDIFIER WITHOUT THE INCLUDED FILTER
OPERATING INSTRUCTIONS
NOTE: Do not clean filter in dishwasher
