PREPARATION FOR USE
1. Remove the front panel by
pressing the two small buttons
on the bottom of each side.
2. Remove the Dust Frame
3. Remove the HEPA & Cold
Catalyst Filter Holder
4. Remove the HEPA & Cold
Catalyst Filter from the package.
5. Insert HEPA & Cold Catalyst
Filter into the holder.
6. Place the HEPA & Cold Catalyst
Filter Holder back into the unit.
7. Place the Dust Frame back into
the unit.
8. Close the Front Panel
9.
Remote
- Remove the battery
holder in the Remote Control
10.Place the battery inside the
holder. Make sure to align the
battery according to the image
to the right.
5
1
2
3
4 & 5
