2 |
P a g e
Datasouth Fastmark FM4602 and FM4603 Setup Guide
Step 3: Load the Media
A.
Set the media roll onto
the media spool. The
media must feed from
the top of the roll with
the black bar on the
bottom
B.
Pass the media above the first
guide bar and below the
second guide bar. Then pass
the media under the black
media sensor bar.
C.
Pull the media through the
front of the printer head.
Replace the guard endcap,
side guard, and close the
print head release lever
After Loading the Media and Ribbon
Please review the Datasouth Fastmark FM4602 Calibration Quick Reference Guide to complete your
printer set up. Remember you must calibrate the printer before printing to ensure the printer correctly
lines up the image on the media.
