Before first use
Placing the filters
The appliance comes with all filters still in protective packaging and fitted inside the unit.
Before using the unit, remove the filters from the unit and then
remove the packaging
from the filters before replacing them again in the same order in which you removed them.
White tags to be facing outward.
Remove all filters, unpack them, then place them back into the appliance as described
below.
Note
: Make sure you insert the filters in the correct position.
Step 1. Place your fingers in the recesses of the side panels and gently pull the top part of
the front panel towards you. Then lift the hooks at the bottom of the panel out of the
bottom of the appliance.
Step 2. Remove pre-filter from the appliance.
Step 3. Remove H13 HEPA with antiviral filter from the appliance.
Step 4. Remove Activated Carbon filter from the appliance.
Step 5. Remove all packaging material from the filters.
Step 6. Place Activated Carbon filter back into the appliance, ensuring the side with the
white tags are facing towards you.
Step 7. Place H13 HEPA with antiviral filter back into the appliance, ensuring the side
with the white tags are facing towards you.
Step 8. Place Pre-filter back into the appliance with the side with flange faces towards you
Step 9. To reattach the front panel, insert the bottom hooks into the bottom of the
appliance first. Then push the panel against the body of the appliance.
