14
14. SNMP
The SkyWay management system includes support for SNMP v1 and v2c via
standard and private MIB tables.
Navigate to Management -> SNMP access the SNMP Configuration screen:
SNMP Enable: For security purposes, the SNMP engine can be disabled, if not
used.
Community Names and Trap Manager IP Address fields should be entered
based on the configuration of your SNMP Manager software.
Please refer to the User Manual of your SNMP Manager software for detailed
information on establishing and managing units via SNMP.
For further questions and to obtain Solectek’s private MIB, please contact
technical support.
15. Network Time
Using the NTP protocol, the SkyWay Excel radio can be time synchronized to
other network devices.
To setup this feature, navigate to Configuration -> Advanced to access the
Date and Time feature configuration:
To time synchronize the radio, the NTP server IP address must be established
and the ‘sync’ button pressed. If connection is successful, the local time/date
will be updated to match NTP time.
An NTP resync will occur automatically twice per day.
If the NTP server is off-line, time is still kept locally on the radio. However, a
reboot of the unit will blank the time. A re-connection to the NTP server or
manual re-configuration of the time is required to correct the time/date.
Time zone information must be entered manually as a fixed offset from UTC.
Once entered, this information is stored in non-volatile local memory and does
not need to be re-entered.
All changes should be followed by a ‘Submit’ to make active.
