7
3. Security rules
3.1. First find a flat wall and unwind the flexible heating film. No part of the heater should
be covered by other objects. After having found a flat surface, it is necessary to pierce
the wall with a drill. Then insert a plastic bolt provided first this purpose. Afterwards screw
a metal bolt inside in a way that it passes through the iron fastener, hooked at the top of
the heater. The flexible heating film must be fixed on the wall in a way that the picture
and the label of the producer can be seen.
3.2. After having noticed a technical problem, it is recommended to unplug the product
and to return it in order to be exchanged or refunded.
3.3. This product is not intended for children and people who have mental, physical or
nervous problems or people who do not have sufficient intelligence to the use of
household appliances. In the case of people under guardianship, it is the owner of the
product who is responsible for its use and its consequences. It is necessary to watch the
children to ensure that they do not play with the heating.
3.4. It is forbidden to connect the heater when it is not unfolded or if there are objects on
it. This could lead to degradation of the protective layer of the heating.
3.5. Is is forbidden to dismantle the heating.
3.6. It is compulsory to use an electrical plug on the lower part of the heating and not a
plug covered by the heating
3.7. The power cable is not exchangeable. If the power cable is damaged, the heating is
considered as disabled.
3.8. It is not recommended to hang the heating on a non-flat surface.
3.9. Do not leave the plugged heating unattended.
3.10. It is forbidden to connect the heating to a circuit whose voltage exceeds 250 V.
3.11. The heating should be kept away from heat sources (fireplace, lighting, etc. ...)
3.12. It is forbidden to hang the heating with adhesive.
3.13. This flexible heating film is not equipped with a thermostat.
3.14. Do not connect the equipment next to a shower, a swimming pool or a bathtub
to avoid direct contact with water.
3.15. Make sure that the heater is properly fixed to the wall to avoid a fall when it is
plugged into an electrical outlet.
4. Storage standards
4.1. It is recommended to store the heater (folded, rolled up) in a dry place
4.2. The diameter of the rolled-up heater does not have to be less than 65 mm.
4.3. To prevent the mechanical malfunctions, it is recommended to avoid contacts
between the product and external elements that may lead to its deterioration.
5. The package composition
foldable heater
Instructions for use
package
plastic dowel and screw
