Model
SE578SA
Service
Replacing Parts
Parts
2. Connecting Arm Assembly
Rev.
Procedures：
1.
Use Phillips head screwdriver to
release Connecting Arm Covers, as
shown in figure 1.
2.
Use 12 and 13 mm wrenches to release
5/16" x1-1/4" hex head bolt, 5/16" x
20 x 1.5T flat washer and 5/16" x 7T
nut which secure the Fish-Eye bearing,
as shown in figure 2.
3.
Use 12 mm wrench to release 5/16" x
15m/m hex head bolt and 5/16" x 20
x1.5T flat washer and Pedal Carriage
Bolt to take apart the Connecting Arm
Assembly, as shown in figure 3.
4.
To take apart the Pedal Assembly, first
release the tension spring, as shown in
figure 4.
1
2
3
4
