3
1. INSTALLATION
1.1.
Transfer the product to the exact location where it will be installed, and place it in an upright
position (the pipe with the red rubber ring should be on the top), carefully standing it on its
base (photo 1). Make sure there are no obstacles shading the collector (trees, high walls
etc.). If however there are high obstacles, the product must be moved further back so that
the distance between the product and the obstacle is twice the height of the obstacle.
Photo 1
1.2.
Unfold the supporting aluminum frames which are folded in the back of the product and
screw them together as in photo 2.
Photo 2
1.3.a) Inclination adjustment – for maximum efficiency on an annual basis adjust the product’s
inclination by moving the support at points A (photo 2) to one of the 3 holes which are found on the
aluminum supports which are fixed on the back of the product along the length.
B
A
E
A
E
C
D
D
F
