14
Lighting Instructions
Before Lighting:
Check gas line/hose for signs of wear, abrasion or cuts. If evidence of deterioration is visible, replace the
part prior to use.
If you smell gas, check for leaks. If odor continues, immediately call for service.
Keep your face and body away from the grill top when lighting.
Grill and Rotisserie Burner Lighting
1. Open lid before lighting. Make sure all knobs are in the
‘OFF’ position.
2. Push and turn burner knob slowly to ‘HI’ position, a clicking will occur.
3. Repeat step 2 until unit lights.
4. If the burner does not ignite within 4 seconds, turn the gas off,
wait for 5 minutes and then repeat steps 1 and 3.
5. For complete shut down, turn all knobs to the ‘OFF’
position. For LP, also turn the cylinder valve off when not in use.
If grill or Rotisserie burners do not light with igniter, they can be lit manually. For Main burners, turn knob on
far right burner to high. Place match or lighter at the top of the flash tube on right side of basin. Once lit turn
next burner on adjacent to far right burner, when lit repeat for far left burner on 32” model.
On rear burner use long Bic lighter or hearth match, turn rear burner to high and hold long match or Bic hearth
lighter to burner surface. Back burner should light immediately.
Light at top of flash tube
Summary of Contents for SO26BQRTR
Page 18: ...18 Parts Exploded View ...
