Figure 41
Figure 42
Figure 43
Target Time
Target Time
DOWN
UP
STOP
PAUSE
START
ENTER
3.6 TARGET DISTANCE mode:
ķ
In Standby mode, press
TAG DISTANCE
key to enter it.
TAG DISTANCE
will light up, “USE
UP& DOWN KEYS TO ADJUST and PRESS ENTER TO ACCEPT” will swicth to display, buzzer sound
1s.
荜
DISTANCE value is flashing, press UP and DOWN to adjust (
Figure 44
). Press ENTER to confirm,
buzzer sound one second.
TAG DISTANCE
continuously light up.
Ĺ
After start workout, TIME/CALORIES/WATTS/SPEED/RPM start count up. DISTANCE window show
the counting down value for 5s (
Figure 45
), then display actual value as
Figure 46
.
ĺ
Press START key one time, system pause training for 30s. Buzzer will sound for 0.5s in every 1s. All
displayed values remian on LCD for 3s and flashing in every 4s. If user continue to stop training for 5
minutes, buzzer sounds 2s and enter to Wake-up mode. Press START key to resume workout.
Ļ
No signal input for 5 minutes, buzzer sounds 1 short beep and enter to Wake-up mode.
ļ
Press STOP key or finish training, buzzer will sound 1s. TIME will display workout time, DISTANCE
will display workout distance, CALORIES will display consumption during workout for 30s. WATT,
SPEED and RPM will switch to display AVG. & MAX. in every 5s (
Figure 20~21
).
Ľ
With pulse signal input, HEART RATE/TARGET HEART RATE/BPM will display 30s. 80%, 65% and
MAX. Pulse value will switch to display accordingly in every 5s (
Figure 20~Figure 21
). Without pulse
input, “NO HR SIGNAL” will continuously light up (
Figure 22~23
).
ľ
During workout, press any program button, system will start the program accordingly.
21
