1 kW
≅
1,36 CV 1 kW
≅
1,36 HP (metric) 1 kW
≅
1,36 CH
44529
Max. Intermittent inclination in operation (º):
30
* The sea water pump flow has been obtained under zero aspiration height conditions. Besides, depending on the arrangement of the
complete system (hoses, elbows, suction heads, etc. ) this value can be lower.
** The diameter system will be calculated depending on each installation in case of a dry exhaust
Total length (mm):
396
Total width (mm):
392
Total height (mm):
500
Down Angle (RO):
25
Installation data / Dimensions
Sea water hose inner diameter (mm):
20
Fuel feeding hose inner diameter (mm):
8
Fuel return hose inner diameter (mm):
5
Exhaust hose inner diameter (mm):
40**
Thermostat valve completely opened (ºC):
85
Maximum sea water temperature (ºC):
32
Heat to be extracted at 100 % load (kcal/h):
13000,93
Engine ratio/coolant pump RPM:
0,87
Coolant pump flow at maximum RPM (l/min):
33
Sea water pump flow at maximum RPM (l/min):
38 *
Maximum suction head of sea water (m):
3
Thermostat valve starts opening (ºC):
71
Total circuit capacity (l):
2,8
Oil pressure switch (kg/cm2):
0,5
Cooling system
Coolant type:
Organic 50%, -38ºC
Volume capacity of coolant circuit (l):
2,7
Minimum pressure at idle (kg/cm2):
1
Oil type:
SAE 15W40
Maixmum oil temperature (ºC):
95
Oil pan capacity (l):
2,3
Lubrication system
Lubrication type:
Forced circulation
Oil consumption at full load (g/kWh):
9,2
Minimum pressure at maximum RPM (kg/cm2):
3
Maximum pressure at maximum RPM (kg/cm2):
4
Idle Consumption (g/kWh):
310
Consumption at 50 % (g/kWh):
278
Consumption At 75 % (g/kWh):
273
Consumption at 100 % (g/kWh):
308
Injection Pressure (bar):
140
Maximum static head of return pipe (bar):
0,26
Firing order:
1-2
Injection timing (º):
17 Before TDC
Fuel standards:
Fueloil diesel ASTM
Injection pump type:
In line
Maximum suction head (m):
0,3
Governor type:
Mechanical
Battery Cable Length (m):
1,5 m
Battery Cable Section (mm2):
70 mm2
Fuel system
Fuel type:
Diesel
Injection system:
Mechanical and indirect
Electrical system
Voltage (V):
12
Alternator (A):
75
Minimum Battery Capacity (Ah):
45
Engine shut off system:
ETS
Rotation (viewed from flywheel side):
Counterclockwise
Idle RPM:
900 (±50)
Intake system:
Naturally aspirated
Starting aid:
Air Heater
Compression ratio:
23:1
Continuous power (kW):
10,6
Intermittent Power (kW):
11,8
Max RPM:
3600
Layout of cylinders:
In line
Cylinder diameter (mm):
76
Stroke (mm):
70
Total displacement (cc):
635
MINI-17
Specifications
No. Of Strokes:
4
Number of cylinders:
2
