Sole Control Remotes SC230, User Manual

Page: 10 / 23

1. Turn on
(TV, VCR,
cable box, or
CD
player)
2.
Press
(the green light will
come on).
STORED CODE IDENTIFICATION
Forget your Codes?
If you didn’t write down the code
numbers when you programmed
your remote and you haven’t
removed the batteries, your Sole
Control can tell you what your
codes are. Just follow these
3.
Press
component key
(“TV”, “VCR”,
or “CD”). The green
light blinks and
stays on).
Press
within eight
seconds (the green
light will stay on).
5. Press “Power”
key until your
component turns
off, waiting two
seconds between
each time you
press “Power”.**
6. As
soon as the
Sole Control turns
your component
off, press
**For CD mode, press “Play” until
CD plays.
instructions.
1.
Press the “Xtra”
key
(the green
light will come on).
2.
Press the
component key
for which you
would like to
know the code
programmed.
4. Count the number of blinks.
There will be three sets of blinks,
separated by a two second pause.
Make sure you write the code
number below for future use!
T V - - - - _
V C R _
NOTE: IO 1
Example: 3
1 blink-pause-lo blinks=310
21