Battery
Charger
EPS
(d-2)
(d-2-1)
(d-2-2)
d-2-1) Charger
Here the user can set the parameters of charger on this page, the inverter
is only compatible with lithium battery. Users can set the charge & discharge
parameters and awaken mode.
For the detailed parameters , please refer to below table.
Discharge Max
Charger
>Min Capacity
10%
Charger
Charge Max
Charger
Current 25A
Current 25A
NOTE
!
Please con rm the Inverter setting for maximum charge/discharge
current is within the range of battery rated charge/discharge current.
The charge current can be set for 0-25A.
The remaining minimum capacity of the battery.
The discharge current can be set for 0-25A.
d-2-2) EPS system ( For E Version only)
X3-Hyrbid inverter with E Version can work on the EPS mode.
EPS parameters can be set as below.
“Mute”means you can set the warning of system which has entered EPS mode.
-”No”means there will be a buzzing and it is the default value.
-”Yes”means you choose to shut down the warning function.
Besides ,if the buzzing is sharp, it means EPS output is “over loads.“
Frequency “here can be set 50Hz or 60Hz please based on correlative loads.
> Mute: No
Frequency: 50Hz
EPS system
Reset
Reset Inv Energy
Reset Meter Energy
Reset Load
Factory Reset
Config Guide
Reset Errorlog
(d-3)
(d-3-1)
(d-3-2)
(d-3-3)
(d-3-4)
(d-3-5)
(d-3-6)
d-3-1) Reset Inv Energy
User can reset the inverter energy record here.
Reset
>No<
Reset Inv Energy
Setting
Setting
58
59
d-3-2) Reset Errorlog
User can reset all inverter errorlog record here.
d-3-3) Reset Meter Energy
User can reset the meter energy record here.
Reset
>No<
Reset Errorlog
Reset
>No<
Reset Met Energy
Summary of Contents for X3-Hybrid
Page 37: ......
