4
Installation
4.1
Installation Prerequisites
Make sure that the installation location meets the following conditions:
Ÿ
The building is designed to withstand earthquakes
Ÿ
The location is far away from the sea, to avoid salt water and humidity
Ÿ
The floor is flat and level
Ÿ
There are no flammable or explosive materials nearby
Ÿ
The ambience is shady and cool, keep away from heat and avoid direct
sunlight.
Ÿ
The temperature and humidity stays at a constant level.
Ÿ
There is minimal dust and dirt in the area.
Ÿ
There is no corrosive gases present, including ammonia and acid vapor.
Ÿ
The ambient temperature is within the range from 0°C to 55°C, and the
optimal ambient temperature is between 15
℃
and 35°C.
NOTE!
If the ambient temperature is outside the operating range, the battery pack
stops operating to protect itself. The optimal temperature range for the battery
pack to operate is 15°C to 35°C. Frequent exposure to harsh temperatures may
deteriorate the performance and lifetime of the battery pack.
4.2
Safety Gear
Installation and maintenance personnel must operate according to applicable
federal, state and local regulations as well as the industry standards regarding the
product installation personnel shall wear safety gears, etc. in order to avoid short
circuit and personal injury.
Insulated gloves
Safety goggles
Safety shoes
4. Installation
12
13
4. Installation
4.3
Tools
These tools are required to install the T-BAT system.
Torque screw driver
Phillips-screw driver
Socket nut wrench
Phillips-head screw driver
Flat-head screw driver
Torque wrench
Tape measure
Drill
Pencil or Marker
4.4
Installation
4.4.1
Check for Transport Damage
Make sure the battery is intact during transportation. If there are some visible
damages, such as cracks, please contact your dealer immediately.
4.4.2
Unpacking
Unpacking the battery package by cutting the packing tape and make sure the
battery packs and the relevant items are complete. See package items on section
4.4.3, please check the packing list carefully, if there's any item missing, please
contact SolaX or your distributer directly.
CAUTION!
According to regional regulations, several people may be required for
moving equipment.
WARNING!
Please strictly follow the installation steps. SolaX will not answer for any
hurting or loss arising by incorrectly assembling and operation.
NOTE!
The Triple Power battery pack is rated at IP55 and thus can be installed
outdoors as well as indoors. However, if installed outdoors, do not allow the
battery pack to be exposed to direct sunlight and moisture.
