5. Installation
5. Installation
Step 6: Place Expansion Bolts into the two holes (the Expansion Bolt is not required
in case of solid wood wall).
Step 7: Place the Wall Bracket on the wall where the mark is drawn previously, and
then secure the Wall Brackets on the wall using Tapping Screws and Gaskets.
Step 8: Place the fourth battery module.
24
25
Tapping Screw × 2
Gasket × 2
Wall Bracket × 2
Attach screw but not
tighten, and align the
hole location of
battery
Let the Platen
down
Step 9: Fix the Platen (3 holes) on both sides of Battery Module using M5 * 10
Phillips-head screw, and then tighten M5*10 screws (Torque: 1.0 N·m).
Platen (3 holes)
×
2
M5*10 Screw
×
6
1.0 N·m
Mark
32 in./812.80 mm
32 in./812.80 mm
