background image

4

5

Wear protecitve glasses

Observe enclosed documentation.

Keep the battery system away from open fames or ignition 
sources.

Keep the battery system away from children.

Danger of high voltages.
Danger to life due to high voltages in the battery system!

Danger.
Risk of electric shock!

The battery pack may explode.

Symbol

Explanation

TUV mark for IEC62619

The battery system should be disposed of at a proper facility 
for environmentally safe recycling.

The battery system should not be disposed together with the 
household waste.
Disposal information can be found in the enclosed documentation.

2.2 

Response to Emergency Situations

2.2.1 

Leaking Batteries

If the battery leaks electrolyte which is corrosive, avoid contact with the leaking 
liquid or gas. Direct contact may lead to skin irritation or chemical burns. If one  
is exposed to the leaked substance, do these actions:
Accidental inhalation of harmful substances:

Evacuate people from the 

 

contaminated area, and seek medical attention immediately.
Eye contact: Rinse eyes with fowing water for 15 minutes, and seek medical 
attention immediately.
Dermal contact: Wash the a

ected area thoroughly with soap and water, and 

seek medical attention immediately.
Ingestion: Induce vomiting, and seek medical attention immediately.

2.2.2 

Fire

In case of a  re, make sure an ABC or carbon dioxide extinguisher is nearby.

WARNING!

The battery pack may catch  re when heated above 150°C.

If a  re beaks out at where the battery is installed, do these 
actions:
1. Extinguish the  re beore the batterry catches  re;
2. If the battery has caught  re, do not try to extinguish the 

re. Evacuate people immediately.

WARNING!

If the battery catches  re, it will produce noxious and poisonous gases. Do 
not  approach.

2.2.3 

Wet Batteries and Damaged Batteries

If the battery is wet or submerged in water, do not try to access it. 
If the battery seems to be damaged, they are not  t or use and may pose a 
danger to people or property.
Please pack the battery in its original container, and then return it to SolaX or 
your distributor.

CAUTION!

suspect such damage, immediately contact SolaX for advice and support.

Damaged batteries may leak electrolyte or produce  ammable 

gas

. If you 

Summary of Contents for HV11550























Reviews: