3
LOG SET INSTALLATION
Step #6
Secure the burner using the (4) #10 sheet metal screws set aside from steps 1 & 2.
Step #7
Install the 3-rock cluster on the 2 pins located just right of the pilot. (Figure 08)
Step #8
Install the single rock on the 2 pins located on the far left of the burner top. The log-locating tab on top
of the rock should be toward the back of the burner. (Figure 09)
Step #9
Install the center birch log by placing the left side of the log on the locating pin left of the pilot. The right
side of the log will rest on top of the 3-rock cluster, rotate the log so it gently touches the rear enamel
panel of the firebox. (Figure 10)
FIGURE 08
FIGURE 09
FIGURE 10
