LOG SET INSTALLATION
Kit Contents:
•
(3) Ceramic Logs
•
(2) Ceramic Rocks
•
13oz Lava Rock
•
Metal Logset burner
Step #1
Your fireplace will have shipped from the factory with the
Glass Media burner in place, before installing the logset
burner, we need to remove the glass burner. The burner is
held in place by 4 sheet metal screws, 2 on the left and 2
on the right. Figure 01 shows 2 screws on the left under
side of the firebox, remove these screws. Keep these
screws in a safe place as they will be needed to install the
Logset burner.
Step #2
Figure 02 shows the 2 screws on the right underside of the
firebox, remove these screws. Keep these screws in a safe
place as they will be needed to install the Logset burner.
Step #3
To remove the burner from the fireplace, slide the entire assembly to the right before lifting up to
remove as shown in figure 03.
FIGURE 01
FIGURE 02
FIGURE 03
