15
ASSEMBLY & INSTALLATION
INSTALLING OR REPLAC
INSTALLING OR REPLAC
INSTALLING OR REPLAC
INSTALLING OR REPLACING THE BATTERIES
ING THE BATTERIES
ING THE BATTERIES
ING THE BATTERIES
1.
The valve control module is powered by
four “AA” batteries. The batteries are
mounted within the Valve Receiver Module
located on the right side of the fireplace
attached to a drop-down mounting bracket
for easy accessibility. Refer to the adjacent
illustration.
2.
Loosen the thumb screw on the module
drop-down mounting bracket by turning
counter-clockwise until the threads are
fully disengaged from the base bracket.
3.
Rotate the Valve Receiver Module and
mounting bracket. Toward you 90 degrees.
4.
Slide off the Battery compartment cover.
5.
Install the 4 “AA” batteries, supplied, using
the guides inside the battery pack to show
you the correct battery orientation.
6.
Replace the battery compartment cover.
Rotate the Valve Receiver Module and
mounting bracket into its home position
and tighten the thumb screw to secure.
7.
The remote handset is powered by three
“AAA” batteries. The access panel is located
on the back of the handset and simply
snaps open to provide access to the battery
compartment. Install the three batteries as
shown on the label inside the remote
control battery compartment.
8.
Replace the remote handset access panel.
Summary of Contents for FORTY6 VF
