c.
Enter and confirm the appropriate password, then click
OK
.
Deleting an AD Credential
Follow these steps to delete a credential.To delete a credential:
1. Click
Manage Active Directory Administrator Credentials
in the UDT
Credentials area in UDT Settings (
Settings > UDT Settings
).
2. Click the
Credential Name
in the list, then click
Delete Credential
.
Managing Active Directory Domain Controllers
UDT uses Active Directory domain controllers to retrieve information about user
activity on the network devices.
The following sections explain how to add, edit, and delete AD domain controllers
from within UDT.
Adding a New AD domain controller
Follow these steps to add a new AD domain controller into UDT.To add a new
domain controller:
1. Click
Manage Active Directory Domain Controller
in the Track Users and
Endpoints area in UDT Settings (Settings > UDT Settings).
2. Click
Add AD Domain Controller
. Enter a hostname or IP address under
Define Node.
3. Check Active Directory Domain Controller in Additional Monitoring Options.
Select the appropriate credential for UDT to use with this AD domain controller.
The UDT software automatically populates User Name and Password based on
the values you entered when you created the credential.
4. Click
Next.
5.Select the node resources to monitor, then click
Next.
6. Check Scan device for ports if you want to monitor the ports on this AD domain
controller.
7. Review the properties you defined. When you are ready, click
OK, ADD
NODE
.
Note:
The Domain Controller Polling Interval indicates how
50
Deleting an AD Credential
