![SolarWinds User Device Tracker UDT Quick Start Manual Download Page 25](http://html1.mh-extra.com/html/solarwinds/user-device-tracker-udt/user-device-tracker-udt_quick-start-manual_1314128025.webp)
Chapter 2: Installing SolarWinds User Device Tracker
3.
If you are prompted to install requirements,
click
Install
, and then
complete the installation, including a reboot, if required.
Notes:
l
Downloading and installing Microsoft .NET
Framework 3.5 may take up to 20 minutes or
more, depending on your existing system
configuration.
l
If a reboot is required, after restart, click
Install
to resume installation, and then click
Next
on the Welcome window.
4.
If the Microsoft Installer Wizard detects that Microsoft Internet
Information Services (IIS) is not installed,
select
Suspend installation
to manually install IIS
, click
Next
, quit setup, and then install IIS as shown
in one of the following sections, depending on your platform:
Note:
The Orion Web Console requires that Microsoft IIS is
installed on the SolarWinds UDT Server. If you do not
install IIS at this point, you must install IIS later, and then
configure a website for the Orion Web Console to use.
5. Read the message about the Orion Improvement Program. If you are
willing to send anonymous data back to SolarWinds for product
improvement, click
Send data
. Otherwise, click
Do not send data
.
Note:
You can stop sending this data at any time by
uninstalling the Orion Improvement Program using the
Control Panel.
6. Read the welcome message, and then click
Next
.
7. If you are upgrading, type Yes that you acknowledge creating a database
backup before installing the new version of UDT. For information on
creating a database backup see the Solarwinds user Device Manager
Administrator Guide.
25