Do not remove any parts or name-
plates from the solar module. Do not
install damaged solar modules.
nOte
tRAnsPORt AnD stORAge
The solar module is a glass product and should be handled with appropriate care.
Do not stand on the solar module. Do not allow any objects to fall or place any ob-
jects on the solar module, as it can cause microcracks in the cells. Never hold or
transport the solar module by the junction box or connection cables. For installa-
tion SOLARWATT strongly recommends the usage of clean, fat and silicone oil free
gloves!
WARning
SOLARWATT solar modules are manufactured using high-quality
materials, making them extremely sturdy and long-lasting. The
shipping crate ensures completely secure transport and easy
picking and packing. As frameless modules are glass products,
you should leave them in the packaging until installation to
help prevent any damage. Modules should be stored in a dry
place and protected from the weather. Recycle packaging items
such as film, fasteners, and boards after use. Contact the local
waste management company responsible regarding recycling.
PROceDuRe in the eVent Of tRAnsPORt
DAMAge
You are responsible for checking the goods and packaging
for transport damage immediately on receipt. If any
damage is discovered, note it on the shipping papers
describing each pallet in detail, and take photographs as
documentary evidence. Have the driver countersign the-
se notes. If more than 33 % solar modules on one pallet
are damaged, refuse to accept the pallet. Please fill out
the „Transport Damage Complaint Notification“ form
(www.solarwatt.de) and return it to SOLARWATT GmbH.
instAllAtiOn
During installation, please take into account the locally valid
construction regulations, accident prevention regulations, the
relevant, generally accepted rules of technology and safety
regulations for working on roofs and buildings, as well as
electrical installations.
SOLARWATT solar modules must be fixed to suitable substruc-
tures, which are designed for the relevant mechanical wind
and snow loads, as well as the weight of the solar modules. The
instructions from the installation system manufacturer must
also be complied with. No mechanical stresses from the actual
building (e.g., roof truss) must be transferred to the solar
module. Have the structural suitability of the building for the
installation of a solar power system checked by a specialist.
During installation, avoid creating shades with the module
clips or installation system to improve the energy yield.
Comply with the minimum distance of 5 mm between the
solar modules to allow the material to expand without tension.
9
STaTuS: 06/2016 | aT-TM-PMS-0917 | inSTallaTion inSTrucTionS | rev. 000 | Subject to change | © 2016 SolarWaTT GmbH
