5 working modes can be chosen from:
ON: Instant light ON
OFF: Instant light OFF
Light control: 100% 2hr
｜
70% 2hr
｜
20% till dawn
Time control: 50% 1hr
｜
100% 4hr
｜
50% 3hr
｜
25% 4hr
Supper Brightness: 100% 6hr
｜
50%6 hr
Always 30% dim, motion sensor trigger jump to 100% for 2 minutes.
Always 20% dim, motion sensor trigger jump to 100% for 2 minutes.
+ 20%: Increase 20% brightness based on original working mode
Remark:
After connected the cables between solar panel and the
lamp, the light will turn on automatically when it detect sunshine
(there is no need using remoter to turn on the solar light ).
Default is M mode, you can choose the best mode according to
different sunshine condition
.
Microwave sensor works by emitting high frequency electric wave to detect objects
movement, such cases above may result in not working well.
Why choose microwave for outdoor lighting?
1.
It can get through glass, wood, plastic and other non-metallic object, so it can be
installed inside and there is no influence on lamp`s appearance.
2. It won`t be influenced by airflow, dust, temperature, humidity like PIR.
What should be noticed when using microwave sensor?
Microwave has been improved a lot compared to PIR, but it is still not perfect. It may
be influenced by metallic things and it`s very sensitive to some extension, may detect
other objects’ movement such as leaves’ movement.
The wrong working situations as below:
1. Light flickers un-regularly.
2. The lamp is too sensitive, so it is always at 100% light, then battery can`t last long.
3. Sensor does not work, not light when people come close
.
U
M
s
T
L
%
20
20
%
OFF
ON
Summary of Contents for SPFS Series
Page 7: ...Process...
