3.1
3.2
Step 3: Drill Holes for exhaust ducts
• Place guide plate in the center of the desired exhaust location
(Fig. 3.1)
• Drill pilot holes
• Using the 6” hole saw to drill the holes using the pilot holes just
cut.
• Drill 1/4” hole under the 6” hole to route the solar panel wire
through
• Mount exhaust vents
• Attach flex duct to exhaust vents using silver aluminum tape
(Fig. 3.2)
Step 2: Mount upper baseplate
•
Align upper and lower baseplate
• Follow steps of steps 4
2