• Drill
• Measuring Tape
• Pencil
• Utility Knife
• Safety Goggles
• Caulk/Caulking Gun
• Wire Cutter
• Wire Strippers
Tools Needed:
The Basement Ventilation System is fully functional right out of
the box.
THE FAN WILL BEGIN TO OPERATE ONCE THE PANEL IS
CONNECTED TO THE BASEMENT SYSTEM. PLEASE KEEP HANDS
AND TOOLS AWAY FROM THE BLADE DURING THE INSTALLATION.
Important Precautions:
• When determining the location of the solar panel, try to face the
panel towards the equator (South in the Northern Hemisphere or
North in the Southern Hemisphere).
• Avoid potential problems such as shading from large objects,
large trees, or other houses which may cause shading during
certain times of the day.
•
WARNING: Avoid all contact with the blades.
Even a small
bend in the blades can cause severe vibration & premature motor
failure.
• Do not cut any structural members in the house
• Always measure twice and cut once.
• Installation of the
Basement System
should be located in the
basement of the building.
• Take precaution while installing the panel on the roof
Components & Parts List:
Helpful Hints:
Basement Ventilation Unit
Solar Panel
Exhaust Ports
Power Supply
Material Included with Kit
Model Numbers:
BVS-30W
BVS-40W
BVS-50W
A.
B.
C.
D
E.
Basement System Install Pack
•
F-030: (4) 1.5” Dual thread rubber washer screw
• A-BRT4: (4) Solar Feet
• F-016: (12) 1.25” self tapping philips truss head screws
• F-018: (36) .5” self drilling philips truss head screw
(20 Black, 16 white)
• E-CNR: (4) Wago Connectors
F-030
A-BRT4
F-016
F-018
50ft. Cable
Pre-attached
Aluminum Tape
Drywall Anchor
Screw #25310
Wall Anchor
Rubber Grommet
Template
2 - 6” Flexible Duct
E-CNR
WARNING:
Take caution during installation. Please
read through
ENTIRE
packet before performing
any work. Not following the instructions can void
the warranty and/or cause serious injury. For
professional help, please call 1-888-355-5SUN
Each duct is 10 ft. long
(12)
(12)
(8)