• Place the gable fan in the previously marked position and screw it into
place with the 6 hex head, rubber washer screws (F-030) included with
the kit.
• Screw into the centers of the framing studs at the flashings 4 corners.
• The final 2 screws should be placed midway down the edge on either
side into the vertical framing.
• Strip off 3” (7.6cm) of cable jacket and about 0.25” (6.3mm) of insulation off each wire if it is
not already prepped.
• Connect the black wire from the solar panel to the black (or blue) wire of the gable fan
using the attached spring operated connectors.
• Connect the red wire from the solar panel to the red wire from the gable fan.
NOTE:
Although not expressly needed for installation, the following steps are
highly recommended for the effective and safe operation of the solar attic fan.
WARNING: The wires from the solar panel will be LIVE. Avoid
allowing the leads to contact each other, yourself, or metal
objects.
WARNING: The fan may start to operate immediately after the connections
are made. Keep hand and other debris free from the blades to avoid
damage or personal injury.
Step 4: Mount the Gable Fan
Step 5: Wire the gable fan to the solar panel cable.
4
5
Summary of Contents for Solaro Aire SA-20WR-GAE
Page 7: ......