17
www
.
solarland
.
com
.
au
6. Maintenance
To ensure optimum module performance, SOLARLAND recommends the following maintenance measures:
Clean the glass surface of the module when required. Always use clean water and a soft sponge or cloth for
cleaning. A mild, non-abrasive cleaning agent may be used to remove stubborn dirt.
Check the electrical, grounding and mechanical connections every six months to verify that they are clean,
secure, undamaged and free of corrosion.
If any problem arises, consult a professional for suggestions.
Caution: observe the maintenance instructions for all components used in the system, such as support frames,
charging regulators, inverters, batteries etc.
7. Shutting down the system
Completely cover system modules with an opaque material to prevent electricity from being generated while
disconnecting conductors.
Disconnect system from all power sources in accordance with instructions for all other components used in the
system.
The system should now be out of operation and can be dismantled. In doing so, observe all the safety
instructions as applicable to installation.
8. Disclaimer of liability
Because the use of this manual and the conditions or methods of installation, operation, use and maintenance of
photovoltaic products are beyond SOLARLAND’s control; SOLARLAND does not accept responsibility and
expressly disclaims liability for loss, damage, or expense arising out of or in any way connected with such
installation, operation, use or maintenance. No responsibility is assumed by SOLARLAND for any infringement of
patents or other rights of third parties, which may result from use of the PV product. No license is granted by
implication or otherwise under any patent or patent rights. The information in this manual is based on
SOLARLAND’s knowledge and experience and is believed to be reliable, but such information including product
specification (without limitations) and suggestions does not constitute a warranty, expressed or implied.
SOLARLAND reserves the right to change the manual, the product, the specifications, or product information
sheets without prior notice.
Please consult your distributor or the manufacturer concerning the warranty of your modules. If you have any
further questions, your dealer will gladly assist you. Subject to technical modifications without notice.
Presented by:
Solarland Australia Pty. Ltd.
Add:
Tel:
Fax:
Email:
Website:
14/235 Spit Rd
Mosman
NSW 2088
Australia
1300 228 996
(02) 9969 3770
[email protected]
www.solarland.com.au
Manufactured by:
Wuxi Tianran Photovoltaic Co., Ltd.
Add:
Tel:
Fax:
Email:
Website:
B11 Huayou Dong Rd., Huayou Ind. Area,
National High-tech Industrial Area, 214028
WUXI, Jiangsu, China
+86-510-81191956
+86-510-85203812
[email protected]
www.solarland.com
Summary of Contents for SLP010-12V
Page 20: ......
