Solaris SMART 54, User Manual

Page: 6 / 9

SOLARIS® SMART54™
10 11
SOLARIS® SMART54™
FIXTURE OPERATION
This section explains the fixture settings and utilities that the user has access to when us -
ing the control panel. Settings are retained when the fixture is powered off.
The SOLARIS® SMART54™ can function in different modes:
DMX 7 CHANNEL MODE.
When operated in DMX 7 channel mode the fixture back
screen will show d001 when first accessed. By setting a value different from 001 you can
change the unit’s DMX address according to your lighting setup. Optional DMX address
values are 1 to 512. When you reach the desired value, press ENTER to save your changes.
It is also possible to use
8 predefined factory colors
, when first accessing predefined
colors back screen will show Au01 when first accessed. By setting a value different from
01 you can scroll between the 8 Predefined factory colors. When you reach the desired
color, press ENTER to save your changes.
2 Automatic color blending effects
are also available
Color Jump Change (Au09). when using this option the fixture wlll jump through the 8
predefined colors (Au01-Au08)
Color Fade Change (Au10).When using this option the fixture will blend through the 8 pre -
defined colors (Au01-Au08)
SOUND TO LIGHT MODE
When operated in Sound to Light mode the fixture back screen
will show So01 when first accessed. In this mode the fixture will change between the 8
predefined colors using sound signal which is detected using the built in microphone at
the back of the fixture. when the back screen of the fixture displays So02 the fixture will
strobe using sound signal which is detected using the built in microphone at the back of
the fixture.
You can also manually
control strobe flashing
by changing the values when the back
screen shows St00 (strobe flash) When you reach the desired value, press ENTER to save
your changes. Values available between 01-16.
COLOR CHANGE MODE when first accessing color change mode back screen will show
SP01 by using the UP & DOWN buttons below the screen, you can control the speed of
the color change. Available values are between 01-16.
STANDALONE MODE COLOR BLENDING
which allows you to manually change the pa -
rameters of the fixture without using DMX data link. When operated in Standalone mode
the fixture back screen will show either: R000 (Red), G000 (Green), B000 (Blue) or w000
(White) when first accessed. By setting a value between 000-255, using the UP & DOWN
buttons below the screen, you can control the desired amount of every color (RGBW).
When you reach the desired value, press ENTER to save your changes.
TOKENS®
The TOKENS ® are symbols we use to mark the features of our fixtures. every fixture has
its own unique set of TOKENS ® according to the fixture’s qualities. Those marks can be
especially useful and informative for the technicians using Solaris fixtures.
The TOKENS ® are located above the digital screen on the back panel of the fixture.
This token indicates the maximum amount of
power consumption
(Displays in Watts)
This token indicates the
angle of the fixture’s beam
(Displayed in degrees)
This token indicates the possible
DMX footprint
(DMX Personality) of the fixture
(according to the different dmx modes of operation)
This token indicates the
weight
of the fixture (Displayed in Kilograms)