Solaris MMA-211, User Manual

Page: 8 / 20

MMA-211
8
Notice
Welding power source unless you have special needs, maintenance must be cut off power
distribution box, ensure that under the premise of safety. If you don't abide by the above principles,
could lead to electric shock, burns and other major accident about personal safety.
Don't put welding machine long time exposure in the sun.
Welder used when had better not put in strong sunlight.
Don't put welding machine in rain.
Don't put welding machine in wet place long time.
when use welding machine to ensure the vent is not covered.
The welder should use, store in a well-ventilated environment.
Shall to open the chassis, with dry compressed air cleaning machine or a vacuum cleaner to clean
up the internal dust and metal scrap at least per six months.
Check all welding cable insulation skin to see if there is any breakage,or replace the cable.
Regularly check all electrical connection parts in the welding machine if there's any loose parts,
and tighten loose parts.
Please take good care of all equipment, don't make them by man-made damage.
TECHNICAL DATA SYMBOLS
The user is not allowed to dispose ofthese
appliances as solid, mixed urban refuse,
and must do it through authorised refuse
collection centres
U
0
Maximum no-load voltage, V
General hazard. Please, read manual
before using
U
1
Power supply voltage, V
welding operations may be carried out in
environments with heightened risk of
electric shock
X
Duty cycle, %
The electric arc produces
dangerous rays for eyes and
skin. Protect yourself!
I
2
Welding output current, A
Danger of fumes, fire and burns
U
2
The welding voltage corresponding
to the output current, V
Symbol of power supply line
IP21S
Protection rating of the covering
ММА – Manual Metal Arc
I
1max
Maximum absorbed current, A
DC current welding
I
1eff
Effective current supplied, A
Symbol for internal structure of welding machine