36
professional Electric
Convector Heater
Lo: Lock
UnLo: Unlock
..on: Turn on timer (clock)
..of: Turn off timer (clock)
tESt: Test
tSEt: Setting Time and Day
ASEt: Adaptive Start Parameters
P 01: early turn-on time per degree (minute)
P 02: maximum early turn-on time (hour)
hProg: Weekly Program Setting
CodE: Key Code (introduction of Exclusive Keylocker)
CntC: Temperature Calibration
Cldr: Display Brightness Adjustment
+ : Test
+ : Display Brightness
+ : Temperature Calibration
: Setting Time
24/7
: Weekly Program
: Adaptive Start
Real Time Clock
As long as the unit is connected to the power, the timer setting is saved even when it
is switched off. The timer setting is lost six hours after the heater is unplugged or a
power outage.
Energy Consumption monitoring
This indicates how many hours the heater’s resistor has been operational. To access
that information, press and hold the menu button for approximately six seconds. The
blinking value on the display indicates the total operating time of the resistor. The
energy consumption of the heater can be estimated based on this value.
Energy Consumption (kWatt/hour) = Value on the Screen x Power of the Unit (Watt)
/ 1000
Types of programs
There are two types of programs: daily and weekly. Only one of them can be activated
professional KıP4550P10-KıP4570P20
Figure 13. Professional Electric Convector Heater Control Unit
WEEKLY SETTING BUTTON
SAFETY LOCK
MENU
ON/OFF BUTTON
TEMPERATURE
DECREASE SWITCH
AMBIENT LIGHT
SENSOR
INDICATOR DISPLAY
POWER CONSUMPTION
INDICATOR
TIMER SETTING BUTTON (TIMER)
TEMPERATURE INCREASE
SWITCH
Summary of Contents for KIP4550E10
Page 44: ...10 2020 since...
