34
Digital Electric
Convector Heater
Digital Electric Convector Heater Switching
on the Unit
Put the plug in a grounded socket to operate your
appliance. Bring the power switch (Figure l.) ON
position (You will see the button on “I” position).
Push the On/Off button of your appliance for a
short while. The unit will turn on. You will see the
room temperature on the Indicator Display when
the appliance turns on.
Increasing or reducing the temperature
You can adjust the temperature with the
temperature increasing or reducing pushbuttons
on the right and left sides of the On/Off button.
If you want to increase or reduce the temperature
push the relevant button (for increasing
button
and for decreasing
button) until the required
temperature is provided. Since the new adjusted
temperature will be provided within a specific
period of time, actual room temperature will
be displayed until the requested temperature is
provided. The unit will increase or decrease the power thereof until the
adjusted temperature is provided. (See Power Consumption Indicator).
programming the Timer / Turn on timer
Turn on timer covers a period of forty-eight (48) hours. The indicator
display 23 will be set to zero if the program memory is set for more than
forty-eight (48) hours. E.g. you are leaving your house and want the
appliance to operate before you come home.
digital KıP4550E10-KıP4570E20
Figure 12. Electronic Control Unit
INDICATOR DISPLAY
POWER CONSUMPTION
INDICATOR
TIMER SETTING BUTTON (TIMER)
TEMPERATURE INCREASE
SWITCH
SAFETY LOCK
AMBIENT LIGHT
SENSOR
ON/OFF BUTTON
TEMPERATURE
DECREASE SWITCH
21
*
*
For portable models
REMOTE CONTROL SENSOR (OPTIONAL)
Summary of Contents for KIP4550E10
Page 44: ...10 2020 since...
