Solaris BASIC 90, User Manual

Page: 3 / 10

SOLARIS® BASIC 90™
4 5
SOLARIS® BASIC 90™
POWER & WIRING
· Always make sure you are connecting this product to the proper volt -
age in accordance with the specifications in this manual or on the prod -
uct’s specification label.
· Never connect this product to a dimmer pack or any rheostat.
· Never disconnect this product
OPERATION
· Do not operate this product if you see damage to the housing, lenses,
LED lights or cables. Have the damaged parts replaced by an authorized
technician at once.
· Do not cover the ventilation slots when operating to avoid internal
overheating.
· Do not aim this product toward the Sun. The lenses could concentrate
the solar energy and cause internal overheating.
· The maximum ambient temperature is 120 °F (49 °C). Do not operate
this product at a higher temperature.
· In case of a serious operating problem, stop using this product imme -
diately
In the unlikely event that your GLOW® product may require service, contact GLOW®
Technical Support.
The SOLARIS® Professional BASIC 90™ is a high-performance 9 X 10W RGBW (Warm White)
4IN1 LED Par lighting fixture. A compact design makes it ideal for Venue Installations, Theat -
rical, Cinema, TV and Stage Use.
The fixtures is deemed for its silent operation achieved by temperature detectors and silent
fans. The Unit is made of a sturdy plastic casting, designed for fixed installation.
The use of RGBW (Warm White) 4IN1 10W LED allows you to reach almost identical Color
tones as those achieved by the use of Conventional lighting.
The Smooth Flicker Free operation makes this fixture Ideal for TV use
The fixture can be controlled using any DMX-compliant controller (4 Channel Mode | 8
Channel Mode) as well as automatic operation mode , sound to light mode and manual
mode.
BEFORE USING THE PRODUCT FOR THE FIRST TIME
1. Read ’Safety information’ on page 3 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Never
attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local power plug to
the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power supply match the
power requirements of the fixture.
5. Refer to the GLOW® website for the most recent user documentation and technical infor -
mation about this fixture.
INTRODUCTION