1 About this manual
1 About this manual
Language
The language of the original manual is German. All
other language versions of this manual are trans-
lations of the original.
Storage
Keep the manual for the entire service life of the pro-
duct and ready to hand. The manual must be pas-
sed on to the new owner when the product is
dismantled/reused. If the manual is lost or
destroyed, request a new copy from the manu-
facturer.
Tips and Warnings
The tips used in this manual are highlighted with
symbols and signal words. The signal word indi-
cates the level and nature of the danger and how to
avert it.
i
Indicates information for correct handling of the
product.
!
CAUTION
- Failure to comply with this instruc-
tion could result in damage to property.
DANGER
- Failure to comply with this instruc-
tion poses a danger to people.
Limitation of liability
SOLARFOCUS GmbH assumes no liability for injury
or material damage resulting from:
–
Failure to observe the instructions in this manual.
–
Use of the product for any purpose other than for
its intended use.
–
Deployment of unqualified personnel.
–
Use of non-approved spare parts.
–
Technical modification of the product by the sys-
tem operator.
Manufacturer
SOLARFOCUS GmbH
Werkstrasse 1, A-4451 St.Ulrich
Company register no. 281755x
Tel.: +43 7252 50 002-0, Fax: +43 7252 50 002-10
www.solarfocus.com
Technical questions about our products
–
Service-Hotline
0043 7252 50002-4920
[email protected]
2 Safety information
Installation and commissioning
–
Heat pump may only be serviced and put into
operation by by certified qualified personnel
(SOLARFOCUS service technician or
SOLARFOCUS service partner).
–
Install heat pump outdoors only.
–
Never disconnect the heat pump from the power
supply (except electrical work). Otherwise risk of
frost damage
Maintenance and repair
–
Have repairs done by qualified personnel only
Improper repairs can lead to risks for the user and
impaired operation
–
Use original spare parts only
–
Have the heat pump serviced annually by qualified
personnel
Handling of refrigerant R410A
–
The heat pump uses refrigerant R410A. Work on
the cooling circuit may be performed only by a qua-
lified refrigerant electrician.
–
Wear suitable gloves and goggles when working
with refrigerant.
What to do in case of escaping refrigerant
–
Escaping refrigerant
[1]
can cause frostbite if it tou-
ches the exit point. If refrigerant escapes do not
touch any components of the heat pump.
[1] Recognizable by oily residue, which is left when exiting.
–
Avoid skin or eye contact with the refrigerant. In
case of skin or eye contact with the refrigerant, a
doctor should be consulted.
–
Switch off heat pump, Contact qualified personnel.
Installation manual
vampair
3
