6 Operating mode Logs
Detailed information on using the
mySOLARFOCUS
app
5.4.6.5 Language selection
Fig. 2-20_02-006
6 Operating mode
Logs
Description of operating mode
n
The log wood stacked in the boiler filling chamber
must be ignited manually.
n
Note: The function
glow holding
simplifies the
next ignition process.
6.1 Preparations for the operating type.
Combustion grate
►
Use this stainless steel combustion grate to heat
with log wood.
Fuel to be used
1
Dry, easily combustible small piece of material
(e.g. small chopped logs, wood shavings, bush
wood chips).
2
Split logs, medium-sized, dry
(recommended: 0.5 m lang).
3
Split logs, large, dry (recommended: 0.5 m
long).
Select operating mode and start
►
Select the
Log wood
operating mode and press
the
Start
button.
Ä
The ID fan starts.
Ä
Status line message:
Ignite logs manually,
Fig. 2-21_01-164-01
i
Starting in
Logs
mode is possible only in the
status
Burner
switched off or
Log burning is ter-
minated
.
6.2 Stack the log wood in the filling cham-
ber and ignite
Basic information: Stack the log wood parallel to the
side wall of the boiler, in the filling chamber.
i
Note regarding thermi
nator
-II 49 and
60 :
Due to the wide filling chamber, the space
can be better used if the log wood is stacked
transversely in the filling chamber.
►
Stack the smaller pieces of wood
1
and
2
parallel
to the side wall of the boiler high enough that the
floor of the filling chamber is covered.
Operation manual
therminator II touch
17
