Chapter 4: Status, Errors and Troubleshooting
This section describes how to use the Wireless Gateway push button to check the
system status, edit parameters, troubleshoot errors, or reset the device.
Accessing the Wireless Gateway and Repeater Web Page
You can check the Wireless Gateway parameters by accessing a web page.
If there is no Ethernet connection (
Maintenance
mode), you can use the Wireless
Gateway/Repeater push button to access the maintenance web page.
To access the web-page when the Wireless Gateway is in the Operational mode
after pairing:
1. On your mobile device, access the list of Wi-Fi networks. Select the access point
with the SSID from the certification label (can be found printed on the certification
label on the back of the device).
2. Open a browser on your mobile device (smart-phone, tablet).
3. When prompted, enter the IP address: 192.168.5.1 to view the Web page.
The following is a web page example of the Wireless Gateway in the Operational
mode:
Chapter 4: Status, Errors and Troubleshooting
13
Wireless Gateway and Wireless Repeater Installation Guide MAN-01-00559-1.5
Summary of Contents for WIFI-GW
Page 29: ......